APPLICATION TIPS & TRICKS * Apply to a clean, dry surface that is free of silicone, loose paint, rust, oil, grease, coal tar, or anything that would hinder adhesion. * Use at temperatures above 10C/50F (including overnight temperatures). * For the construction of a few cracks or expansion joints, non-woven fabric or polyester cloth can be used for reinforcement and coating. * Apply each coat in an alternate direction to the last coat to ensure even coverage. * Remove painters tape/blocking while the coating is still wet. * Allow 48-72 hours to dry, curing depends on temperature, humidity, and airflow. Under the environmental conditions of low temperature or higher humidity, the curing time will increase. * Do not walk on the surface until the waterproof adhesive is dry.